When starting the pure water machine, the water source should be connected first, and the pipeline of the pure water machine should be checked before turning on the power. If it is necessary to stop using the pure water machine, turn off the power first, and then turn off the water source. The water purifier should be energized and flowed for a long time when it is in use. Since the water purifier has automatic control functions, frequent power and water cuts will affect the normal use of the water purifier. When using the water purifier, the filter elements of all levels should be replaced regularly as required to ensure the service life of the water purifier and the quality of the water.
When the water purifier is not used for a long time, the power and water source should be turned off first, and then all the pure water stored in the water purifier should be discharged. After the water purifier has been used continuously for several months, the user should also store the pure water in the water purifier according to the situation. Drain all the water at one time, which can play a cleaning role. When scrubbing the surface of the pure water machine, some neutral detergents should be used.
The reverse osmosis membrane used in the water purifier is divided into 35GPD, 50GPD, 75GPD, 100GPD and other specifications according to its daily production flow (where “GPD” means how many gallons of pure water are produced in 24 hours, 1 gallon is about 3.785 liters, and the reverse The permeable membrane produces about 190 liters of pure water in 24 hours), and the daily water flow rate of the pure water machine is the same as that of the reverse osmosis membrane. However, the actual water flow of the pure water machine is also affected by conditions such as the pressure of the raw water and the temperature of the raw water, among which the temperature of the raw water is more affected. In this way, the water production of pure water machine is high in summer and low in winter.