Raw water source: municipal water, tap water, well water
Raw water TDS: 2000ppm）
Permeate output quality：TDS≤60-100 ppm, WHO direct drinking standard.
Salt rejection: 99%
Power supply: 380V/220V/110V,50/60Hz
1. Brief introduction for mineral water purification drinking
The device is integrated structural design. The hoses and threads are properly sealed. Its small volume is for easy movement, installation and maintenance. The materials for the device are corrosion-resistant, reinforced plastics, nickel-aluminium bronze, to solve the water corrosion problem. Mineral water purification drinking.
The S2T series are RO unit used for treating water with TDS below 2000ppm, such as tap water and municipal water. This series are standard designing and installation, which include water pump, membrane, sediment filter, etc. The permeated water after treated can drink directly. S2T series have been exported to many countries, such as Bahrain, Middle east and East Asia.
2.Technical route and flow diagram instructions
The technical route is as following.
Raw tank–> sand filter–> carbon filter–> softener –> sediment filter–>high pressure pump–>RO desalination device–>permeate tank
3. Mineral water purification drinking specification:
|Model||Capacity (LPH)||3rd year operating pressure(PSI)||No. Of 4”element||4″ membrane vessel||Designed recovery||Driving motor 50Hz/380V|
4. 1500GPD water treatment weights & dimensions:
|Model||Approximate unit dimension||Approximate shipping dimension|
5. Components for mineral water purification drinking
- T.F.C.R.O membrane with 99% average salt rejection
- FRP pressure vessel
- SS centrifugal pump
- Coated carbon steel frame
- Sediment filter
- Product water flow meter
- Concentrate regulate valve
- Pressure gauge
- Pump exit regulate valve
- 380V/50HZ power supply
- 304SS pressure vessel
- CIP system
- Concentrate recycle
- Chemical dosing system
- 220V/60HZ power supply
6. Our Certification