FilmTec™ BW30 PRO-400 Reverse Osmosis Membrane Element

FilmTec™ BW30 PRO-400

Product name:BW30 PRO-400 RO membrane
Model:BW30 PRO-400
Salt rejection:99.6%
Effective membrane area:37m²
Test pressure:15.5bar
Capacity:11000 GPD
Membrane type:T.F.C
PH range for continue working:2-11
PH range for cleanig:1-13
Packing Material:CARTON
Applicable Industries:Hotels, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Food & Beverage Shops
After Warranty Service:Video technical support, Online support, Spare parts, Field maintenance and repair service

Description

1. Brief introduction of FilmTec™ BW30 PRO-400

RO membrane FilmTec™ BW30 PRO-400 is High Rejection and High Performance Industry-Standard Brackish Water Reverse Osmosis Membrane Element. The membrane area is 37m² and with capacity of 11000GPD, salt rejection of 99.6%.

Delivers consistent water quality and higher rejection and flow than previous generation BW30 product
Based on historical BW30 Industry-standard RO membrane with decades of proven performance
Excellent durability resulting in stable, long-term performance
Demineralization for industrial applications, such as: Power Generation, Steel & Metal, Chemical & Petrochemical
Municipal water purification

2. Typical Properties for FilmTec™ BW30 PRO-400


Model	Size (Diameter)		Active area		Permeate flow rate		Stabilized salt rejection	Data sheets
Model	mm	inch	ft²	m²	gpd	m³/d	%	Data sheets
BW30 PRO-4040	100	4	78	7.2	2600	9.8	99.7
LCLE-4040	100	4	78	7.2	2500	9.5	99.2
LCHR-4040	100	4	78	7.2	2900	11	99.7
HSRO-4040-FF	100	4	90	8.4	1900	7.2	99.5
BW30 PRO-400	200	8	400	37	11000	42	99.6
BW30-400	200	8	400	37	10500	40	99.5
BW30-400IG	200	8	400	37	10500	40	99.5
BW30-365	200	8	365	34	9500	36	99.5
BW30HR-440i	200	8	440	41	13650	48	99.7
BW30FR-365	200	8	365	34	9500	36	99.5
BW30FR-400	200	8	400	37	10500	40	99.5
HSRO-390-FF	200	8	390	36	9000	34	99.5
SW30HR-380	200	8	380	35	6000	23	99.7

Permeate flow and salt rejection based on the following standard conditions: 2,000 ppm NaCl, 225 psi (15.5 bar), 77°F (25°C), pH 8 and 15% recovery.
Flow rates for individual elements may vary but will be no more than 15% below the value shown.
Sales specifications may vary as design revisions take place.

3. Element Dimensions

4. Package

5. Suggested Operating Conditions

Membrane Type	Polyamide Thin-Film Composite
Maximum Operating Temperature 1	113°F (45°C)
Maximum Operating Pressure	600 psig (41 bar)
Maximum Pressure Drop (Per Element)	15 psig (1.0 bar)
Maximum Pressure Drop (Per Pressure Vessel (Minimum 4 Elements))	50 psig (3.5 bar)
pH Range (Continuous Operation 1)	2 – 11
pH Range (Short-Term Cleaning (30 min.) 2)	1 – 13
Maximum Feed Flow 3	75 gpm (17 m3/hr)
Maximum Feed Silt Density Index	SDI 5
Free Chlorine Tolerance 4	< 0.1 ppm

Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
Refer to FilmTec™ Cleaning Guidelines (Form No. 45-D01696-en).
For recommended feed and permeate flow rates, flux, and recovery for various feed sources, refer to FilmTec™ Design Guidelines for multiple-element systems of 8-inch elements (Form No. 45-D01695-en).
Oxidation damage is not covered under warranty, DuPont recommends removing residual free chlorine by pretreatment prior to membrane exposure. Please refer to Dechlorinating