What’s MBBR and It’s function

The MBBR system consists of an aeration tank (similar to an activated sludge tank) with special plastic carriers that provide a surface where a biofilm can grow. The carriers are made of a material with a density close to the density of water (1 g/cm3). An example is high-density polyethylene (HDPE) which has a density close to 0.95 g/cm3. The carriers will be mixed in the tank by the aeration system and thus will have good contact between the substrate in the effluent wastewater and the biomass on the carriers.

To prevent the plastic carriers from escaping the aeration it is necessary to have a sieve on the outlet of the tank. To achieve higher concentration of biomass in the bioreactors, CHIWATEC MBBR systems have also been used where suspended and attached biomass co-exist contributing both to biological processes.

The MBBR system is considered a biofilm process. Other conventional biofilm processes for wastewater treatment are called trickling filter, rotating biological contactor (RBC) and biological aerated filter (BAF). Biofilm processes in general require less space than activated sludge systems because the biomass is more concentrated, and the efficiency of the system is less dependent on the final sludge separation. A disadvantage with other biofilm processes is that they experience bioclogging and build-up of headloss.

MBBR systems don’t need a recycling of the sludge, which is the case with activated sludge systems.

The MBBR system is often installed as a retrofit of existing activated sludge tanks to increase the capacity of the existing system. The degree of filling of carriers can be adapted to the specific situation and the desired capacity. Thus an existing treatment plant can increase its capacity without increasing the footprint by constructing new tanks.

When constructing the filling degree can be set to, for example, 40% in the beginning, and later be increased to 70% by filling more carriers. Examples of situations can be population increase in a city for a municipal wastewater treatment plant or increased wastewater production from an industrial factory.

Some other advantages compared to activated sludge systems are:

  1. Higher effective sludge retention time (SRT) which is favorable for nitrification
  2. Responds to load fluctuations without operator intervention
  3. Lower sludge production
  4. Less area required
  5. Resilient to toxic shock
  6. Process performance independent of secondary clarifier (due to the fact that there is no sludge return line).
  7. Large diameter submersible mixers are commonly used as a method for mixing in these systems.

Xi’an CHIWATEC Water Treatment Technology is a high-tech enterprise specialized in various water processing devices. Aside from these individual products, which cover a number of types and series, we can also help with related comprehensive engineering projects. Thanks to our hard work and dedication upon our founding, we are now one of the fastest-developing water treatment equipment manufacturers in Western China.

Further reading:

100m3day waste water treatment plant with MBBR technical (3)

Do you have a water treatment project we can help with

Designing,machining,installing,commissioning, customize and one-stop service

    We will answer your email shortly!

    FOLLOW US