Ultra Filtration System 2000LPH Ultra Filtration System

Description

1. Brief introduction of Ultra filtration system 2000LPH

UF water treatment plant for pre-treatment of RO, adopted ultra filtration system 2000LPH with high quality. It mainly used for irrigation, industrial or commercial water purification plant.

Ultra filtration membrane is used to remove suspended solids, colloids, microorganism, bacteria,virus and macro molecule organism from the raw water.It has good function of color removing, oil removing, turbidity removing, COD and BOD removing. UF technology can be adopted under condition of normal temperature and low pressure with low energy consumption.

2. Features for Ultra filtration system 2000LPH

Pure and ultrapure water equipment,
No bacterium no heat raw water equipment for pharmacy,
Purification for beverage, drinking water and mineral water,
Separation, concentration and purification in industry
Wastewater treatment, electrophoretic coating, electroplating, oil wastewater treatment, etc.

3. Parameter table

Process	Parameter	Note
Pre-treatment	50-150um precision filter
Max. feed turbidity	≤15NTU	When feed water turbidity is more than 15NTU，please add pre-treatment and precision filter.
Running method	Cross flow/dead end flow	Dead end flow can be adopted when feed water turbidity less than5NTU. Otherwise, cross flow type is suggested.
Feed water pressure	0.1~0.3MPa
Max. feed pressure	0.5Mpa
20℃ transmembrane pressure（TMP）	28-150Kpa
Max. transmembrane pressure	0.2Mpa
Feed PH	2~12
Max. residual chlorine	100ppm

3. Features of Water treatment UF system

High precision. The bore diameter of UF membrane is 0.001~0.1m. Which can remove bacteria, colloids, rust and macromolecule organism effectively and ensure the output water quality stable with less COD,SS and SDI.
Pro-long RO membrane cleaning peroid and life time by adopting UF as pre-treatment
With universal wheels so easy to move.
Compact frame with less space.
Low work pressure, low operation cost.
Easy and safe operation.
Easy maintaining.

4. Specification for membrane

item model	AQU200
Membrane material	PVC
fiber inlet/outlet diameter	0.9mm/1.5mm
Detained molecular weight	100，000dalton
dimension	Ø200X1470m
Effective membrane surface	28 m²
Permeate flux(L/H,0.12Mpa,25°C)	6,400
capacity(L/H)	60-160L/ m².H
Membrane housing material	ABS
End cap material	Epoxy resin
Operation pressure	0.1-0.3MPa
Max.feed water pressure	0.5MPa
Max.membrane pressure difference	0.2MPa
Feed water PH	2-12
Operation temperature	5℃-45℃
Permeate turbidity	< 0.1NTU
Silt density index（SDI）	< 1
Suspended solid，particle（>0.2µm）	100% removed
Microbe、pathogen	99.99% removed
Feed water quality requirement	turbidity≤15NTU. （pretreatment should be added when the raw water is from ground, river and well. It is recommended to add precision filter, 100um at least in precision, to ensure the turbidity no more than 15NTU）

5. Output capacity for different application:

Raw water source	Max.output capacity(m³/h)	Min.output capacity(m³/h)
Municipal water	3.2	2.1
Surface water	2.8	1.5
Superficial layer under ground water	3.1	2
Deep layer under ground water	2.2	1.8
City recycled water	2.3	1.8
Seawater	2.3	1