250LPH industry pure water

250LPH industry pure water

Material:Wooden Case, stainless steel
Power:0.55KW, 380V,50HZ,3phase
Warranty:1 year
After-sales Service Provided:Video technical support, Field installation, commissioning and training, Field maintenance and repair service, Free spare parts, Online support
Edi stack:CP-500S
Pure water resistivity:above 15
Feed water:RO product water
Feed water TEA:less than 35ppm
Feed water PH:6.0-9.0



1. Brief introduction of 250LPH industry pure water

250LPH industry pure water by cation ion exchange membrane for Pharmaceutical factory high pure fresh water treatment EDI module project for chemical making fresh water. Electrodeionization (EDI) is a process that uses ion exchange resins to absorb ions from a dilute water stream and then transports the absorbed ions through ion-exchange membranes into a concentrate water stream under the influence of an applied electro field. Further more, the ions are removed continually on the direction of water flow. The conductivity value is get lower and lower. H+ and OH- are formed under the direct current to maintain the system current and regenerate the ion-exchange membrane. Thus to realize the continues and deep salt rejection. EDI system water treatment of ultrapure water for electric industrial use.

2. Application of 250LPH industry pure water

EDI typically may be used in any applications that require ultra pure water at a resistivity above 1 M9·cm. The typical industries that use ultra pure water include

  1. Microelectronic and semiconductor production.
  2. Pharmaceutical and biomedical industries.
  3. Chemical production.
  4. High pressure boiler such as the ones in power plants.

3. EDI module advatages

  • Feed water hardness can be 10mg/l
  • Does not consume salts in operating and need much lower operating expenses.
  • Does not need to recycle the concentrate, which makes the system much simpler.
  • The EDI systems require a little energy.

4. Running condition for 250LPH industry pure water

4.1 running parameter

The product water quality of EDI is depended on the operation condition.    Which including system designing data, feed water quality, feed water pressure. etc.

  • The EDI unit is adopted CP-2000S EDI module, 2 pcs.
  • Unit module voltage range: 50-120V
  • Unit module current range: 0.5-6A
  • System product water flow rate: 2.00-4.00m3/r
  • System concentrate flow rate: 0.30-0.60m3/h
  • System electrolyte flow rate: 0.12m3/h

4.2 running current and voltage

Warning: the heat produced when current pass through EDI module must be take away by water. Thus, once EDI product and concentrate stream is blocked or stopped, the power should be cut off. Otherwise, EDI module will be burned thoroughly.

4.3 feed water requirement

  1. feed water: RO product water
  2. TEA< 35ppm.
  3. pH : 6.0-9.0
  4. Temperature:5-35oC
  5. Feed water pressure<0.4Mpa
  6. hardness<10.0 ppm.
  7. organic glass matter<0.5 ppm.
  8. CL2<0.05 ppm , O3<0.02 ppm.
  9. conductivity<60US/CM
  10. H2S<0.01 ppm.
  11. SIO2<0.5 ppm.
  12. SDI15<1.0
  13. color<5APHA

5. EDI module introduction

5.1 Dilute chamber

Dilute chamber is the space for the dilute stream (product water) to pass through. It is formed by a frame, one piece of anionic ion exchange membrane on one side of the frame and a piece of cationic ion exchange membrane on the other side of the frame. Inside the frame there is tightly packed with mixed ion exchange resins.

5.2 Concentrate chamber

Concentrate chamber is the space for the concentrate to pass through. It is created by layers of two dilute chambers. It is also formed by anionic ion exchange membrane, cationic ion exchange membrane and ion exchange resins.

5.3 Electrolyte chamber

Electrolyte chamber is next to an anode and a catholyte chamber next to a cathode. Isolation board and reinforcing plates.

6. Main parts for 250LPH industry pure water

1EDI feed pumpCHL2-401set
2sediment filterYS1-20″1set
3filter cartridge2.75*40″*1um1pc
4EDI moduleCP-500S1pc
6flow switchCF-100L1pc
7flow switchCF-100L1pc
8permeate flow meterZ-30011pc
9conductivity meterRM-32001pc
10product solenoid valveDN251pc
11unqualified product solenoid valveDN251pc
12pressure gauge0-150PSI5pc
13pressure switchJC-2061pc
14conductivity meterCM-3301pc
16electrical control system1ste
17system pipelines304SS1set

7. Certification:

ISO9001-2019 safety production licenseCE-certification of RO-water Filtration Drinking Plant

8. Comments from customers:

Comments From Customers

9. Package and transportation:

water Filtration Drinking Plant package and transportation

10. Finished projects:

    We will answer your email shortly!

    You may also like…

    Go to Top