Principles of Removing Inorganic Compounds Using Reverse Osmosis Membrane Separation Technology

Reverse osmosis (RO) is a highly efficient and compact technology that offers exceptional removal rates for viruses, phages, and bacteria, achieving a rejection rate of at least 3-log (over 99.9%). However, while RO membranes are highly effective, maintaining water purity on the permeate side requires appropriate assembly, monitoring, and maintenance of the system. System performance, especially in microorganism removal, depends on optimal design, operation, and management, rather than solely on the membrane characteristics.

Reverse osmosis (RO) technology, initially developed in the 1960s as part of aerospace research in the United States, operates by using a pressure differential across a semi-permeable membrane. The extremely fine pores of RO membranes are as small as nanometers (1 nanometer = 10^-9 meters). Under sufficient pressure, water molecules (H₂O) can pass through the membrane, while inorganic salts, heavy metal ions, organic substances, colloids, bacteria, and viruses are blocked, resulting in the separation of purified water (permeate) and concentrated impurities (concentrate).

RO technology is widely utilized across various industries, including research, pharmaceuticals, food and beverages, and seawater desalination. After passing through the RO membrane, the purified water typically exhibits an electrical conductivity of 5 µS/cm, meeting the standards for Type III laboratory water. Further purification via atomic-level ion exchange columns can achieve a resistivity of up to 18.2 MΩ·cm, surpassing the standards for Type I laboratory water (GB 682-92).

Reverse osmosis relies on a semi-permeable membrane that allows water to pass but blocks salts. If pure water and saline water are separated by an ideal semi-permeable membrane, water will naturally flow from the pure side to the saline side—a process known as osmosis. By applying pressure to the saline side, the natural osmotic flow is reduced. When this applied pressure matches the osmotic pressure, the net flow of water across the membrane is zero. Exceeding this pressure reverses the flow direction, causing water from the saline side to migrate to the pure side—this is the fundamental principle of reverse osmosis.

Features of RO Membrane Separation Technology

• Thermally Stable: RO technology operates at room temperature without phase changes, making it suitable for the concentration and separation of heat-sensitive substances. Compared to phase-change separation methods, RO is more energy-efficient.
• Broad Impurity Removal: RO membranes can filter a wide range of impurities, from salts to microorganisms.
• High Rejection Rate: RO systems achieve high salt rejection and water recovery, capable of retaining solutes with particle sizes larger than a few nanometers.

Proper pre-treatment is crucial for RO systems, particularly in terms of raw water quality. To avoid fouling and maintain efficiency, the following pre-treatment steps are recommended:

• Suspended Solids Removal: Raw water should be pre-treated to remove suspended particles and lower turbidity to prevent blockages.
• Microbial Control: Disinfection is essential to inhibit microbial growth that could cause biofouling.
• Monitoring of Silt Density Index (SDI): The water entering an RO system should have an SDI value of less than 5, ideally below 3, to minimize membrane fouling.
• pH and Temperature Control: Adjusting the pH according to the RO membrane’s optimal range is critical, as each membrane type has its ideal operating pH. Additionally, water temperature affects permeate flux. For cellulose acetate membranes, the temperature is typically kept between 20-40°C, while composite membranes are maintained within 5-45°C to avoid membrane degradation.

RO membrane technology is a powerful and versatile tool for water purification, capable of removing a wide range of impurities with high efficiency. When designed and managed correctly, RO systems can deliver consistent, high-quality water for industrial, laboratory, and residential applications.

Xian CHIWATEC Water Treatment Technology es una empresa de alta tecnología especializada en varios dispositivos de procesamiento de agua. Aparte de estos productos individuales, que cubren una serie de tipos y series, también podemos ayudar con proyectos de ingeniería integrales relacionados. Gracias a nuestro arduo trabajo y dedicación desde nuestra fundación, ahora somos uno de los fabricantes de equipos de tratamiento de agua de más rápido desarrollo en el oeste de China.

Otras lecturas

• ¿Qué es el inhibidor de escala de membrana de ósmosis inversa RO?
• RO membrane cleaning method
• Membrana OI
• Optimized Reverse Osmosis Membrane Cleaning Process Flow