Optimizing Water Flux and High-Pressure Pump Selection in Ultrapure Water System Design

When designing an ultrapure water system, selecting the appropriate water flux is crucial as it directly determines the number of reverse osmosis (RO) membrane elements required for the system. A lower water flux results in the need for more membrane elements, increasing the overall size of the system. However, with a lower water flux, there’s reduced deposition of pollutants on the membrane surface, leading to slower fouling rates and extended membrane lifespan.

Conversely, a higher water flux reduces the number of membrane elements required, thus lowering the initial equipment investment. However, operational experience suggests that once the water flux exceeds a certain threshold, the fouling rate of the membrane increases exponentially. This is particularly problematic in systems with high flux, as it accelerates membrane contamination.

Typically, for groundwater sources with good water quality, a higher flux can be selected during design. For contaminated surface water sources, a lower water flux should be chosen to reduce the risk of membrane fouling.

The driving force behind the RO membrane separation process is the pressure differential, which is provided by the high-pressure pump. As a critical component of the ultrapure water system, the performance of the high-pressure pump directly impacts the economic efficiency of the RO desalination process.

The selection of a high-pressure pump depends on the feed water flow rate and the required feed pressure, which can be calculated using RO design software. This software, available from membrane manufacturers, allows for easy determination of the required feed pressure based on the selected membrane elements, module arrangement, and system recovery rate.

Currently, the main options for high-pressure pumps include multistage centrifugal pumps and volumetric plunger pumps (used in smaller systems). When using multistage centrifugal pumps, it’s essential to install a check valve and a motorized slow-opening valve on the pump’s outlet pipeline. The check valve prevents damage to the high-pressure pump due to backflow when the system shuts down, while the slow-opening valve prevents membrane module damage caused by rapid pressure increases. The recommended pressurization speed should not exceed 0.07 MPa/s.

Plunger pumps operate by converting mechanical energy into static pressure through the reciprocating motion of pistons. Due to the harmonic motion of the pistons, the volumetric flow rate of the liquid experiences periodic fluctuations. Plunger pumps generally have a smaller, more uniform flow rate, with high efficiency even when flow rate or head changes. However, to prevent pulsating pressure from damaging the membrane, a buffer should be installed at the pump’s outlet.

Selecting the optimal water flux and high-pressure pump is essential for the efficient operation of ultrapure water systems. Careful consideration of these factors can significantly reduce membrane fouling and enhance system longevity. For tailored system design and pump selection, consulting with experts and utilizing advanced design software is highly recommended.

Xian CHIWATEC Water Treatment Technology es una empresa de alta tecnología especializada en varios dispositivos de procesamiento de agua. Aparte de estos productos individuales, que cubren una serie de tipos y series, también podemos ayudar con proyectos de ingeniería integrales relacionados. Gracias a nuestro arduo trabajo y dedicación desde nuestra fundación, ahora somos uno de los fabricantes de equipos de tratamiento de agua de más rápido desarrollo en el oeste de China.

Otras lecturas

• Equipos de agua ultrapura: introducción al flujo de proceso del sistema de agua ultrapura
• Introducción a las características y ámbito de aplicación del sistema de agua ultrapura.
• Overview and characteristics of ultrapure water systems in the electronics industry
• Principio de funcionamiento del sistema de agua ultrapura EDI e introducción de la tecnología principal
• Comprehensive Guide to Four Key Pharmaceutical Ultra-Pure Water Preparation Processes