Water Pressure: 0.15—0.6MPa
Water Temperature: 5℃-50℃
Water Turbidity: Down-flow regeneration<5FTU
Brine Line Connector: 3/8″M
Riser Pipe: 1.05 ″OD
Max Flow Rate: 4 m3/h
Suitable Tank Size (in): 6″~18″
Water Pressure: 0.15—0.6MPa
1. Brief introduction of runxin F64A manual softener
runxin F64A manual softener multi-port manual valve for softener resin water control valve for hardness water treatment plant. With dlow flow regeneration type and max. water capacity is 4.5m3/hr.
F64A is a manual control valve which is widely used in water treatment field for small RO plant such as 250LPH, 500LPH RO unit pre-treatment. The suitable tanks are 1054, 1354, 1665, 1865. The flow rate for the valve is upto 4.5m3/hr. It is useful to control the water way for water softener. Has function of running, rinse, backwash. regeneration and salt suction. Remove the hardness in the raw water so that the water is suitable to entering into the RO unit for further purification.
2. Features of runxin F64A manual softener
It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing.
No water pass the valve of single tank type in regeneration
Various ways of installation: it can be top mounted or side mounted
Handle alternatives: metal Handle or plastic handle
1. More reliable way of opening and close
2. Manual function:When it out of electricity or controllers do not work properly, will operate by the hand-wheel.
3.Keyboard locked function: The key set will lock automatic exceed one minute, you must open the lock over again when you operate, prevent wrong operation.
4.It adopts LED dynamic colorful screen: The colorful screen flicker express it is in the state of running, otherwise express it is in the state of regeneration.
5.Prompt power cut secularly: Out of electricity exceed three days, you must reinstall the currently time when the timepiece flicker ceaselessly, the already setting time is not changed.
6.No coming water while single pot type control valve regeneration
7.Having output signal connector: via three port of open, close, common down-lead to connect the electromagnetism valve or increase-pressure pumps.
8.Two modes of flow meter: By changing the process parameter to realize to change the mode to be volume delayed (A-01) or volume timely (A-02).
9.It could set up maximum interval regeneration days: This parameter means no matter how much flux it is set, or how much flux treated, when it exceeds the maximum interval generation days (could be set within 0 to 40 days), than it will start up regeneration although the flux is not reached the set value.
1)Household purify, soften system.
2)Boiler softening water system.
3)Ro pre-treatment system.
4)Swimming pool filters equipment.
5)Ion exchange equipment.
4. Specification data
|Model||Inlet/Outlet||Drain||Base||Riser pipe||Brine line connector||Max. water treatment capa.(m3/h)||Tank diameter Range for softeners||Tank diameter Range for filters|
5. Package information for runxin F64A manual softener